1. All apps
  2. WiFi Scanner & Network Tools
  3. WiFi Channel and Frequency Chart (2.4, 5, 6 GHz)

WiFi Channel and Frequency Chart (2.4, 5, 6 GHz)

Convert a WiFi frequency in MHz to its channel number, with a chart for 2.4, 5 and 6 GHz and how to pick a channel.

Every WiFi channel is a number that stands for a center frequency in MHz. This page gives the chart, the formulas with worked examples and a converter, then shows how to pick a channel.

Formulas

The channel number comes from the center frequency (f, in MHz). The spacing is 5 MHz in all three bands. These are the same formulas the app WiFi Scanner & Network Tools uses.

BandFrequency range (MHz)Channel
2.4 GHz2412 to 2472(f - 2407) / 5
2.4 GHz248414
5 GHz5160 to 5885(f - 5000) / 5
6 GHz5955 to 7115(f - 5950) / 5

The channel plan itself is defined in IEEE Std 802.11 (the 2020 revision and its amendments). Which channels you may use depends on your country.

Worked examples

  1. 2437 MHz. (2437 - 2407) / 5 = 30 / 5 = channel 6, 2.4 GHz.
  2. 5180 MHz. (5180 - 5000) / 5 = 180 / 5 = channel 36, 5 GHz.
  3. 5955 MHz. (5955 - 5950) / 5 = 5 / 5 = channel 1, 6 GHz. Channel numbers repeat in 6 GHz, so the band always has to be named.
  4. 2484 MHz. A special case: channel 14. It is only allowed in Japan, and only for older 802.11b.

Convert a frequency

2.4 GHz channel chart

ChannelCenter frequency (MHz)
12412
22417
32422
42427
52432
62437
72442
82447
92452
102457
112462
122467
132472
142484

Channels 1 to 11 are allowed in the United States. Channels 1 to 13 are allowed in most of Europe.

5 GHz examples

ChannelCenter frequency (MHz)
365180
405200
445220
485240
1005500
1495745
1655825

Some 5 GHz channels (around 52 to 144) share spectrum with radar. Your router may have to move off them, which can cause a short drop in the connection.

6 GHz examples

ChannelCenter frequency (MHz)
15955
55975
376135
936415

6 GHz is used by WiFi 6E and WiFi 7 devices.

Which channel should I use?

  • 2.4 GHz is 20 MHz wide per channel, but channels are only 5 MHz apart. Neighbors on channels 1 and 3 overlap. The only three channels that do not overlap each other are 1, 6 and 11. Use one of them.
  • 5 GHz and 6 GHz have many more non-overlapping channels, so crowding is a smaller problem.
  • Pick the channel your neighbors use least. A router set to "auto" usually does this, but not always well.
  • A wider channel (40, 80 or 160 MHz) gives more speed but takes more room and meets more interference.
  • If a device does not see your 5 GHz network, check that your router uses a channel the device supports.

Find your channel on Android

The WiFi info screen in WiFi Scanner & Network Tools shows your band, channel and link speed, and the WiFi standard (WiFi 4, 5, 6, 6E or 7) of your current connection. It works out the channel from the frequency Android reports, with the formulas above. Android requires the Location permission to read the network name. The app does not use or store your location.

Combine this with the WiFi signal strength chart to see whether the channel or the signal level is the problem.