What it does
- Recommends the smallest pipe from 1/2 inch to 4 inch that stays within the velocity limit.
- Shows velocity in feet per second and friction loss in psi per 100 ft for every size, in one compact table.
- Shows total friction loss for a straight run when you enter a length.
- Supports IPC and UPC, 2024 and 2021 editions, and shows the section numbers behind each result.
- Converts WSFU to GPM with the public-domain Hunter curve, for flush tank or flushometer systems.
- Uses Hazen-Williams with design C values and published inner pipe diameters.
- Sets default velocity limits from the code, or from manufacturer guidance where the code gives none. Guidance is clearly marked as non-code. You can change the limit and reset it to the default.
- Switches the default limit between cold and hot water.
- Adds a note when the recommended size is below a code minimum, such as a 3/4 inch water service.
- Shows your last calculation in a home-screen widget.






